SKU: LNL-BAT-BESS-001

Multiple BESS Supplies Label

Name: Multiple BESS Supplies Label
Brand: Lists and Labels
SKU: LNL-BAT-BESS-001

$2.50

Quantity

100 x 38mm White and Black Traffolyte Label- Adhesive Backing

This Multiple BESS Supplies Label is designed for installations where multiple Battery Energy Storage Systems (BESS) are connected and require clear identification in accordance with current Australian standards.

Based on AS/NZS 4777.1:2024, this label allows installers to clearly identify each individual BESS within a system (e.g. BESS #1 of 4) while documenting critical electrical characteristics including:

Short Circuit Current (A)
Maximum D.C. Voltage (V)

This ensures safe isolation, servicing, and emergency response by providing essential system data at a glance.

DVC-A Use Only

This label is applicable to DVC-A installations only.

It is intended for systems where:

The DC voltage exceeds extra-low voltage limits, and
Additional hazard and identification requirements apply under AS/NZS 4777.1:2024.

If your system is DVC-B or C, this label may not be required or appropriate, and alternative signage should be considered.
Designed in accordance with:
AS/NZS 4777.1:2024 – Grid connection of energy systems via inverters (Installation requirements)
Refer Appendix B – Figure B.7 (Multiple BESS signage)
AS/NZS 5139:2019 – Battery energy storage systems (safety requirements)
AS/NZS 3000:2018 – Wiring Rules (general identification and safety principles)

Multiple BESS Supplies Label

Important

Standards Alignment

You might also like